| Author | Topic |
|---|
Registered:
May 2002
|
|
Re: Torque Settings for 2T/GEU/3T Hybrid
|
Sun, 27 April 2003 08:34
|
 |
you lazy bastard juzzo!
connecting rod and cap for the 2T is-
400-500kg.cm (28.9-36.2ft.lb)
the flywheel-
580-660kg.cm (42-47.7ft.lbs) for the 2T
810-890kg.cm(58.6-64.4ft.lb) for the 2TG
These torques from the Toyota Carina and Celica Repair Manual. You'll probably have to put a bit more torque on them as a hybrid would go harder than a stock engine, so bigbadbenny's right, just do the flywheel up FT!
|
|
|
