| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: HELP needed to rebuild carby from 4k
|
Sun, 27 April 2003 12:55
 
|
 |
the carb is pretty simple, not much to it... all you really need is a gasket kit, which'll have all gaskets and the accel pump in it...
they usually have a diagram too.
you can improve by removing the 'high speed valve' which will improve top end a bit by removing the large obstruction fromthe secondary throat. but this comes at a cost of possibly bogging down a bit at low rpm and high throttle... which is why it's there in the first place... i found it to help a bit, but going to a 34DMS weber was a better move for my car... it depends on the mods you have done or want to do?
i'd say give it a go... do you have a digi camera? do you have a vacuum operated high speed valve or a mechanical one (with the counterweight?)
Cya, Stewart
|
|
|
