F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Injector specifications. 7AFE, 7MGE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gianttomato Forums Junkie I supported Toymods Location: I renounced punctuation Registered: May 2002	Injector specifications 7MGE Mon, 28 April 2003 01:29 Injector flow rate is 276-356 cc/minute. So 316 cc/min is slap bang in the middle. Flow is measured in volume over time period, so injector flow is generally measured se cc (cubic centimetres, which is the same as millilitres) per minute. Injector resistance is 13.8 ohm. As a general rule doubling fuel pressure increases injector flow rate by approximately 1.4 times. I believe such increase is non linear. No idea what the 7AFE injector specs are. [Updated on: Mon, 28 April 2003 01:36] [Report message to a moderator]

	Subject	Poster	Date
	Injector specifications. 7AFE, 7MGE	TWSTD	Sun, 27 April 2003 22:12
	Re: Injector specifications. 7AFE, 7MGE	Johnny	Sun, 27 April 2003 23:08
	Re: Injector specifications. 7AFE, 7MGE	TWSTD	Sun, 27 April 2003 23:15
	Injector specifications 7MGE	gianttomato	Mon, 28 April 2003 01:29
	Re: Injector specifications 7MGE	TWSTD	Mon, 28 April 2003 01:38
	Re: Injector specifications. 7AFE, 7MGE	ed_ma61	Mon, 28 April 2003 03:11
	Re: Injector specifications. 7AFE, 7MGE	gianttomato	Mon, 28 April 2003 03:53
	Re: Injector specifications. 7AFE, 7MGE	Johnny	Tue, 29 April 2003 00:57

Previous Topic:	Strut Bars Front/Rear: Myths and Facts
Next Topic:	High flowing CT26

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.