| Author | Topic |
|---|
Location:
Sydney, OZ
Registered:
May 2002
|
|
Re: Injector specifications. 7AFE, 7MGE
|
Tue, 29 April 2003 00:57
|
 |
| Quote: |
both flow ~285cc/min (where'd you get that 150 figure from??)
|
The last engine I built, I did some investigation work, I lined up the following list, and had them clean and flowed on a professional flow bench (Vane Autocraft Injector flow bench), all figures are at 300Kpa (44Psi), so naturally more pressure more flow in theory:
22RE- 92cc/min
4AGE 100Kw- 95cc/min
7AFE -94.4cc/min
7MGE - 150cc/min
4AGZE- 200cc/min
The 7M I have are green and are 13.8 ohm's... I checked them last night. the 7AFTE that was available here had a were purple, but I wouldn't know the flow rates.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Injector specifications. 7AFE, 7MGE
|
TWSTD | Sun, 27 April 2003 22:12 |
|
Re: Injector specifications. 7AFE, 7MGE
|
Johnny | Sun, 27 April 2003 23:08 |
|
Re: Injector specifications. 7AFE, 7MGE
|
TWSTD | Sun, 27 April 2003 23:15 |
|
Injector specifications 7MGE
|
gianttomato | Mon, 28 April 2003 01:29 |
|
Re: Injector specifications 7MGE
|
TWSTD | Mon, 28 April 2003 01:38 |
|
Re: Injector specifications. 7AFE, 7MGE
|
ed_ma61 | Mon, 28 April 2003 03:11 |
|
Re: Injector specifications. 7AFE, 7MGE
|
gianttomato | Mon, 28 April 2003 03:53 |
|
Re: Injector specifications. 7AFE, 7MGE
|
Johnny | Tue, 29 April 2003 00:57 |
