| Author | Topic |
|---|
Location:
Cabramatta, NSW
Registered:
May 2002
|
 Re: 1GGTE Celica Conversion HELP!
|
Tue, 29 April 2003 07:15
|
 |
You will need to do these:
 Custom engine mounts
Front sump (although I'm not sure if the mid-rear won't fit with mods)
Radiator outlet moved to other side.
If you're using a W58, you will need new lines to the clutch slave since it sits on the opposite side compared to the W57 (this was in the RA60, not 100% sure about SA63)
Standard RA65 fuel pump has served me fine, but I have bigger lines, you might want to consider this.
If you want to use the standard air box, you'll need to move the battery to the boot
Wiring
That's about all I can think of at the moment. Everything else bolts straight up. Hope that helps.
|
|
|
