| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: MA70 brake booster into MA61
|
Tue, 29 April 2003 14:19
 
|
 |
i dont buy it - doesnt make much sense...
the master cyl would have to be the same bore and stroke as the ma61, otherwise the master/slave ratio would be all screwed up, and pedal feel would either be way too stiff or too spongey.
as for the brake booster itself, it would have to be significantly bigger in surface area to provide any real inprovment in assist id imagine, and im not sure HOW much improvemnt that would provide even if it were...
correct me if im wrong...
either way though, there's no magic way of increasing pressure in the lines short of pushing on the pedal harder.
brake power and reponsiveness is based on good master/slave ratio, minimal flexion/expansion in the brake lines under pressure, minimal flex in the claiper itself, a decent sized rotor, and good pad material (size of pad and rotor is good for heat dissipation - reduced pad fade)
cheers
ed
|
|
|
| | Subject | Poster | Date |
|---|
 |
MA70 brake booster into MA61
|
BlackSupra | Tue, 29 April 2003 13:47 |
|
Re: MA70 brake booster into MA61
|
ed_ma61 | Tue, 29 April 2003 14:19 |
|
Re: MA70 brake booster into MA61
|
ed_ma61 | Tue, 29 April 2003 14:27 |
|
Re: MA70 brake booster into MA61
|
Norbie | Tue, 29 April 2003 23:21 |
|
Re: MA70 brake booster into MA61
|
BlackSupra | Wed, 30 April 2003 12:19 |
|
Re: MA70 brake booster into MA61
|
Norbie | Wed, 30 April 2003 12:24 |
|
Re: MA70 brake booster into MA61
|
BlackSupra | Wed, 30 April 2003 12:48 |
|
Re: MA70 brake booster into MA61
|
ed_ma61 | Thu, 01 May 2003 00:37 |
|
Re: MA70 brake booster into MA61
|
Norbie | Thu, 01 May 2003 01:08 |
|
Re: MA70 brake booster into MA61
|
E30-323ti | Thu, 01 May 2003 04:07 |
|
Re: MA70 brake booster into MA61
|
Norbie | Thu, 01 May 2003 05:39 |
|
Re: MA70 brake booster into MA61
|
E30-323ti | Thu, 01 May 2003 22:08 |
