| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: 4AGZE into a 74 TA22
|
Fri, 02 May 2003 06:15
|
 |
let me know what you do with the mounts - the drivers side cast ae86 mount is too long - if you use the stock ta22 mounts on the K frame - the passenger side one is also too long - again, shorten it by about 2" and you might be ok.
if you're using a T50 - 4 holes in the floor where the gearbox X member bolts to - the stock T50 in the TA22 uses the front two - the T50 for the 4A will use the back two. you'll have to cut the shifter hole back further by about 2-3".
other than that take pix. would love to see!
|
|
|
