| Author | Topic |
|---|
Registered:
June 2002
|
|
Re: 1jzge NA camshafts into a 1jzgte engine question
|
Fri, 09 May 2003 05:25
|
 |
|
It definitly has one tooth, it may have had two on it, but only one of them lined up with the sensor, I'll have to double check that tomorrow. I don't understand why they have two sensors on the same cam, seems like overkill.I measued the lobe only,from base to tip, it was 1 mm longer than the turbo one. I don't have a dial indicator, but I can try and make some more measurements tomorrow. I know a 2jz cam seal has a bigger hole for the cam, I should hopefully have one this week to compare it to. I just emailed a friend of mine in Japan who runs a tuner shop, hopefully he can shed some light on it. He has told me in the past he has done it before and it is a nice cheap upgrade.
|
|
|
