Toymods Car Club Inc: Miscellaneous => FS- Apex suspension suit MZ20/21, GZ20, JZA70, GA70, MA70

Toymods Car Club
www.toymods.org.au

Classifieds » Miscellaneous » FS- Apex suspension suit MZ20/21, GZ20, JZA70, GA70, MA70 Show: Today's Posts :: Show Polls Email to friend

Author

Topic

soarer21
Forums Junkie

Toymods Forum Sponsor

Location:
Brisbane
Registered:
February 2003

Re: FS- Apex suspension suit MZ20/21, GZ20, JZA70, GA70, MA70	Sat, 10 May 2003 02:19

one requires some attention which shouldnt cost more then $120 or so by a capable shock reconditioner. It has a very light oil mist on the leg which I assume is from the shock itself. Lots of other places for it to come from but better to be safe then sorry as its a pain changing the rears over, pulling the back seat out etc. Fitting the springs isnt too hard to do, so long as you have some sort of mechanical aptitude. The rears require the rear seat to be removed, and the parcel shelf cover. They are then not too hard to extract without removing other components. The fronts benefit from removing the bolt through the upper A arm which again is not too hard to do. Buy a set of spring compressors though as it makes things a little safer, or ensure you have a bit of room if you are going to do it my way, which is to place a firm foot on the spring then use a rattlegun to undo the top nut. Things tend to fly around a little but its a damn sight quicker. Not a great deal of GZ/MZ20 performance stuff but if you are interested I can track down some items. Not much in japan for these cars sadly. I got an intercooler for mine the other week, 100mm thick job made for an MA70. I also have a soarer but its an MZ20 model with a worked 7M manual (converted myself) I also have a wagon with a heavily modified 1GGTE [Report message to a moderator]

Current Time: Tue Jul 22 13:03:11 UTC 2025

Total time taken to generate the page: 0.004127025604248 seconds

.:: Contact :: Home ::.