| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: ke35 corolla paddock basher power up????
|
Tue, 13 May 2003 05:23
 
|
 |
you can get a very tidy motor for a grand, def over 100hp.
get 4K block, 3K head (preferably big port) port out the exhaust and clean up the combustion chambers. if a small port, take a couple of mm out of the intakes, but ne careful.
regrind cam, Camtech609 is a very nice cam, i have power from 3500-8000+ and rising. machine rocker towers down by the increase in lift or your rockers will flog out.
buy some bends and weld up a tuned length 4-2-1 manifold, and a 2" exhaust.
get a weber carb such as 34DMS or 32/36 and rejet to suit, using standard manifold and the redline/lynx adaptor.
oh and balance the pistons and rods... the crank is usually good.
that should get you over 100hp for not much cash. i have 105@8000 with same setup, but the intakes are restrictive and slowly decrease torque (for me, above 4500rpm)
Cya, Stewart
|
|
|
