| Author | Topic |
|---|
Registered:
May 2002
|
|
Re: 2tg EFI problems, car idles but wont rev....
|
Fri, 23 May 2003 00:55
 
|
 |
things i've been thinking of-
-has your MAP vacuum line been kinked or come loose?
-take the cover off and check your TPS, maybe check all wires from TPS to computer.
-The dizzy does advance when i sucked on the vacuum, but the advance thingo looked loose, try replacing the distributer.
-no chance the computer could have reset some of the values is there?
-blocked injectors.
looking at an toyota EFI manual page ive got, the thermo sensor has around 5kohms at 0degrees c, then as engine warms resistance goes down to around 0.5kohm at 60 degrees C. so if you have like a 0.5kohm resistor (from dicksmiths) try that, or just try replacing it. you said you had like an 8kohm or something last nite, which would mean the engine was at minus 20degrees!!
|
|
|
| | Subject | Poster | Date |
|---|
 |
2tg EFI problems, car idles but wont rev....
|
Snyper | Wed, 21 May 2003 09:33 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
juzzo84 | Wed, 21 May 2003 14:22 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
Blaze | Thu, 22 May 2003 04:06 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
nilezy | Thu, 22 May 2003 04:24 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
Norbie | Thu, 22 May 2003 06:19 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
Snyper | Thu, 22 May 2003 09:53 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
inferno | Fri, 23 May 2003 00:55 |
|
Re: 2tg EFI problems, car idles but wont rev....
|
Snyper | Fri, 23 May 2003 05:46 |
