| Author | Topic |
|---|
Toymods member
I supported Toymods
Location:
Rydalmere, NSW
Registered:
May 2002
|
|
Re: How to cut aluminium?
|
Fri, 23 May 2003 14:36
 
|
 |
I cut out my Scorpion's (last car) aluminium from 1.6mm checkerplate with a wood blade in a jigsaw. The project was to make a false-floor in the boot. Pics available on request.  Take it slow and it does the job just fine. A LOT of aluminium splinters though.
My latest project (a 3mm thick checkerplated bashplate) I also did with the same tools, except it just took a bit more time to do. I know what 10mm aluminium is like, so I'd suggest using maybe a high-tensile hacksaw blade?  Or like others have suggested - get it done at a laser-cutting place. 
|
|
|
| | Subject | Poster | Date |
|---|
 |
How to cut aluminium?
|
krayzie | Tue, 20 May 2003 06:14 |
|
Re: How to cut aluminium?
|
NeoNasty | Tue, 20 May 2003 06:21 |
|
Re: How to cut aluminium?
|
krayzie | Tue, 20 May 2003 06:28 |
|
Re: How to cut aluminium?
|
shinybluesteel | Tue, 20 May 2003 08:04 |
|
Re: How to cut aluminium?
|
Helmann | Tue, 20 May 2003 10:23 |
|
Re: How to cut aluminium?
|
TA22-3SGTE | Tue, 20 May 2003 10:29 |
|
Re: How to cut aluminium?
|
Tranth17 | Wed, 21 May 2003 01:49 |
|
Re: How to cut aluminium?
|
Ben Wilson | Wed, 21 May 2003 04:15 |
|
Re: How to cut aluminium?
|
M.W.P. | Wed, 21 May 2003 06:26 |
|
Re: How to cut aluminium?
|
_Rivmasta_ | Wed, 21 May 2003 06:29 |
|
Re: How to cut aluminium?
|
kingmick | Thu, 22 May 2003 11:04 |
|
Re: How to cut aluminium?
|
gold28 | Fri, 23 May 2003 03:46 |
|
Re: How to cut aluminium?
|
nzsimon | Fri, 23 May 2003 05:51 |
|
Re: How to cut aluminium?
|
krayzie | Fri, 23 May 2003 08:26 |
|
Re: How to cut aluminium?
|
toycelica77 | Fri, 23 May 2003 12:20 |
|
Re: How to cut aluminium?
|
RAV-GT4 | Fri, 23 May 2003 14:36 |
|
Re: How to cut aluminium?
|
dcving | Sat, 24 May 2003 07:35 |
|
Re: How to cut aluminium?
|
jbrough | Sat, 24 May 2003 12:37 |
