| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: Tuning day
|
Sun, 25 May 2003 11:41
 
|
 |
I'm not an expert, but I thought that when looking at the logs of a tuning run when we were testing full load (MAP 100%) I'm sure we could see if it was knocking during this power run. When it does detect a knock it retards the timing depending on the size of the knock (can set the range, I think we set the max retard is about 8 degrees).
How would you know if the full load timing was at its limit if you couldn't detect it knocking?
|
|
|
