F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » camira delco computers Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
roger Regular Registered: June 2002	Re: camira delco computers Mon, 26 May 2003 01:15 Cool 1, You would need to go to DFI Kalmaker sells a 4 cylinder kit to do this. They use coil and modules from the states that are compatible with delco. Daewoo may have DFI? you could use the gear off these as I belive they use a family 2 engine? and use delco not sure if they are DFI? I have a program for a 3sgte that would get you started. Chriss, Wiring every thing up is a sinch. I have done it many times. There are only about 4 wires for power and a few earth wires. You install all the camira sensors on the engine so it all just plugs up. Delco requires high resistance injector of around 12 ohms if you are using low resistance injectors you will need to put ballast resistors in the loom. Here are some basics to do it your self. Use this software to modify the binnary http://www.passtimeracing.com/eric/Cars/EFI/ It is very good with 3d charts and tables etc Go here ftp://ftp.diy-efi.org/incoming/ and donload this file 1227808_5d.ecu This is the definition file that maps out the tables etc from the emprom image (binnary) you will need a binnary from a 1227808 to look at so download one from here http://www.techedge.com.au/vehicle/1227808/fourbin s.htm use the Camira 2.0L one AKFL2168 Now have a play and familarize your self with the environment. For diagnostics goto http://w1.601.telia.com/~u60113744/software/winald l/winaldl.htm and download winaldl this is a fantastic program you use for live diagnostics and data loging. This lets you know what you need to change in winbin to tune the car. You will need to build the cable they suggest on this site. Now you need something to program the eprom I use the burner from this site because it is cheap and nasty. http://www.zws.com/products/epromr2/ cost about $20 to build. You will need to buy and eprom eraser I made one with a mercury vapour tube for about $15 similar to this http://www.mikeg2.freeserve.co.uk/eprom/ With all this setup you are ready to start programming you can do it in the car with a lap top but you won't be doing it in real time. But who can program and drive any way. You can however data log all the results analyse it and make a change on the side of the road within 5 minutes. Excpect to burn 100 eproms to get it right, so it is good to have plenty of blank eproms. You can get them second hand quite cheap. Don't buy them new as they are around $10 each. So in short it can be tuned by your self if you have the smarts and the time to get this stuff together. To tune fuel maps read about the Block Learn Mulitiplier (BLM) and the INT. To tune the ignition it is good to have a knock indicator or headphones HKS Pete is right to get it tunned professional will cost $2000 and fitted would cost around. [Updated on: Mon, 26 May 2003 01:23] [Report message to a moderator]

	Subject	Poster	Date
	camira delco computers	$450 ta22	Thu, 22 May 2003 02:33
	Re: camira delco computers	THE WITZL	Thu, 22 May 2003 02:57
	Re: camira delco computers	CrAiGzEE	Thu, 22 May 2003 05:59
	Re: camira delco computers	$450 ta22	Thu, 22 May 2003 13:17
	Re: camira delco computers	earlyrolla	Thu, 22 May 2003 13:35
	Re: camira delco computers	SupraPete	Thu, 22 May 2003 15:27
	Re: camira delco computers	myTA22	Fri, 23 May 2003 02:07
	Re: camira delco computers	Grega	Thu, 22 May 2003 20:29
	Re: camira delco computers	roger	Thu, 22 May 2003 22:33
	Re: camira delco computers	Chriph	Fri, 23 May 2003 02:37
	Re: camira delco computers	chrisss	Fri, 23 May 2003 05:38
	Re: camira delco computers	myTA22	Fri, 23 May 2003 05:43
	Re: camira delco computers	roger	Fri, 23 May 2003 06:54
	Re: camira delco computers	Cool1	Fri, 23 May 2003 07:58
	Re: camira delco computers	SupraPete	Fri, 23 May 2003 08:53
	Re: camira delco computers	$450 ta22	Fri, 23 May 2003 14:48
	Re: camira delco computers	gold28	Sat, 24 May 2003 08:18
	Re: camira delco computers	chrisss	Sat, 24 May 2003 09:08
	Re: camira delco computers	SupraPete	Sun, 25 May 2003 02:26
	Re: camira delco computers	roger	Mon, 26 May 2003 01:15
	Re: camira delco computers	SupraPete	Mon, 26 May 2003 01:45
	Re: camira delco computers	roger	Mon, 26 May 2003 03:29
	Re: camira delco computers	roger	Tue, 27 May 2003 23:13

Previous Topic:	1JZ conversion into a GZ20 Soarer....
Next Topic:	ST141 Corona Sedan

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.