| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Mon, 26 May 2003 02:24
 
|
 |
Dave, haven't caught you on ICQ lately, so I'll leave it here.
How does this sound?
DBA Slotted rotors for a Lotus Elise
280mm diameter, 26mm thick, overall height very close to Mk2 Supra
Only $116 each from Autospeed too.
VT Commodore onwards 2-piston calipers
Cheap, common, more effective than MA61 and can fit the thicker disc.
Rear use factory brakes, just make sure they're in good condition.
DOT5.1 fluid and then see how the bias is. Sound ok? I was thinking about this for a cheap solution for bigger brakes that'd have no problems fitting under a 15" wheel.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Sun, 25 May 2003 12:33 |
|
Re: What cars came with a 4x114.3 hub?
|
Norbie | Sun, 25 May 2003 12:58 |
|
Re: What cars came with a 4x114.3 hub?
|
BlackSupra | Sun, 25 May 2003 13:30 |
|
Re: What cars came with a 4x114.3 hub?
|
gianttomato | Sun, 25 May 2003 13:56 |
|
Re: What cars came with a 4x114.3 hub?
|
BlackSupra | Sun, 25 May 2003 14:22 |
|
Re: What cars came with a 4x114.3 hub?
|
BlackSupra | Sun, 25 May 2003 14:23 |
|
Re: What cars came with a 4x114.3 hub?
|
BlackSupra | Mon, 26 May 2003 00:17 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
demuire | Mon, 26 May 2003 01:41 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
gianttomato | Mon, 26 May 2003 02:15 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Mon, 26 May 2003 02:24 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
gianttomato | Mon, 26 May 2003 03:22 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Mon, 26 May 2003 06:00 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Norbie | Mon, 26 May 2003 06:36 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
SUPRAGTE | Mon, 26 May 2003 10:55 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Mon, 26 May 2003 11:10 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Mon, 26 May 2003 11:14 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Mon, 26 May 2003 11:18 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Mon, 26 May 2003 11:21 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Mon, 26 May 2003 11:42 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Mon, 26 May 2003 11:43 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Mon, 26 May 2003 11:48 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
gianttomato | Mon, 26 May 2003 11:51 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Mon, 26 May 2003 11:53 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Mon, 26 May 2003 11:59 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Mon, 26 May 2003 12:10 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Mon, 26 May 2003 13:37 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
ed_ma61 | Mon, 26 May 2003 13:51 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
rob_RA40 | Mon, 26 May 2003 22:03 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Norbie | Mon, 26 May 2003 22:42 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
gianttomato | Mon, 26 May 2003 23:46 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
SUPRAGTE | Tue, 27 May 2003 09:31 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Tue, 27 May 2003 10:18 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Purple_Beasty | Tue, 27 May 2003 10:25 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Tue, 27 May 2003 11:40 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Tue, 27 May 2003 11:56 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Tue, 27 May 2003 12:06 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Tue, 27 May 2003 12:12 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Tue, 27 May 2003 12:18 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Tue, 27 May 2003 13:13 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Wed, 28 May 2003 06:02 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Thu, 29 May 2003 05:30 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Thu, 29 May 2003 06:47 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
draven | Thu, 29 May 2003 07:17 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
demuire | Tue, 27 May 2003 11:39 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Wed, 28 May 2003 00:47 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
BlackSupra | Wed, 28 May 2003 01:03 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Norbie | Fri, 30 May 2003 03:02 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Jonny2TG | Sat, 31 May 2003 14:00 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Sat, 31 May 2003 15:08 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
Norbie | Wed, 28 May 2003 01:52 |
|
Re: Brake rotor/caliper asembly to fit under MA61 wheels
|
justcallmefrank | Wed, 28 May 2003 01:55 |
