| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Remove steer wheel on ke11?
|
Mon, 26 May 2003 07:38
 
|
 |
well, it aint that bad because there are no collapsible columns to damage 
loosen the nut off a little bit (like 1mm gap between nut and washer) not too much so you don't whack your nose..
hold onto one of the horizontal bits from the centre to rim, pull back on it, and whack the same position on the other side, so you sort of forcefully lever it off. you can put a fair bit of effort into it and it should come off...
the dodgy way is to loosen the nut to only just loose (still on the spring washer) and drive around a bit till it loosens 
good luck.
Cya, Stewart
|
|
|
