| Author | Topic |
|---|
Location:
Central Coast, NSW
Registered:
May 2002
|
|
Re: ignition that will work with 4AG carby setup
|
Wed, 04 June 2003 05:10
 
|
 |
I have my solution after looking around.
use the early model distributor off the 4AGE 86KW with the 4 star wheel in the top. If you look carefully at a 4A-C distributor it has a little silver casing attached to the side just next to the dizzy cap. take off the silver cover and there is a module.
Items:
1 4A-C module
1 4A-GE 86KW dizzy
1 Coil (even 100KW coil)
I will have more on the installation when I install the module. it has 4 connectors and Im not sure which ones go where.
(2 for pickup and 2 for coil)
|
|
|
| | Subject | Poster | Date |
|---|
 |
ignition that will work with 4AG carby setup
|
AZA510 | Mon, 02 June 2003 02:15 |
|
Re: ignition that will work with 4AG carby setup
|
Grega | Mon, 02 June 2003 06:59 |
|
Re: ignition that will work with 4AG carby setup
|
mrshin | Mon, 02 June 2003 10:08 |
|
Re: ignition that will work with 4AG carby setup
|
IRA11Y | Mon, 02 June 2003 10:39 |
|
Re: ignition that will work with 4AG carby setup
|
Grega | Mon, 02 June 2003 19:49 |
|
Re: ignition that will work with 4AG carby setup
|
mrshin | Mon, 02 June 2003 23:35 |
|
Re: ignition that will work with 4AG carby setup
|
Grega | Tue, 03 June 2003 06:21 |
|
Re: ignition that will work with 4AG carby setup
|
AZA510 | Wed, 04 June 2003 05:10 |
|
Re: ignition that will work with 4AG carby setup
|
Grega | Wed, 04 June 2003 23:07 |
|
Re: ignition that will work with 4AG carby setup
|
AZA510 | Tue, 10 June 2003 01:14 |
