F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » recommended drop for lowering a MX83 Cressie Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
celicamad Forums Junkie Location: newcastle Registered: June 2002	Re: recommended drop for lowering a MX83 Cressie Sun, 08 June 2003 12:16 shocks will firm the ride but koni compared to pedders ... no wonder you compared a rotary to a 2j . Basically there is no sustitute for good springs . i fitted the kings srpings at 1 and 1/2 inch and found them not too bad using kyb shocks the ride was still a little firm however with a big rear sway bar handling is VERY good . i would simply remove the springs and take them someone that can re-set them to inch and a half and probably soften about 20% this should only cost $50 per spring MAX Konis are WAAAAAAAY to firm unless your building a track car and pedders should be sold by k mart the dual valve monroe arnt too bad but simply dont last . if you intend fitting a 1j or similar power the rear end can't be too firm or wheelsipn is a major issue [Report message to a moderator]

	Subject	Poster	Date
	recommended drop for lowering a MX83 Cressie	speakafreaka	Sun, 08 June 2003 11:15
	Re: recommended drop for lowering a MX83 Cressie	celicaboy	Sun, 08 June 2003 11:24
	Re: recommended drop for lowering a MX83 Cressie	celicamad	Sun, 08 June 2003 12:16
	Re: recommended drop for lowering a MX83 Cressie	celicaboy	Sun, 08 June 2003 12:22
	Re: recommended drop for lowering a MX83 Cressie	munki	Sun, 08 June 2003 12:24
	Re: recommended drop for lowering a MX83 Cressie	celicamad	Sun, 08 June 2003 12:41
	Re: recommended drop for lowering a MX83 Cressie	frebbles	Sun, 08 June 2003 13:10
	Re: recommended drop for lowering a MX83 Cressie	munki	Mon, 09 June 2003 07:50
	Re: recommended drop for lowering a MX83 Cressie	biased99	Mon, 09 June 2003 09:53
	Re: recommended drop for lowering a MX83 Cressie	speakafreaka	Mon, 09 June 2003 11:03
	Re: recommended drop for lowering a MX83 Cressie	scrote	Mon, 09 June 2003 19:45
	Re: recommended drop for lowering a MX83 Cressie	speakafreaka	Tue, 10 June 2003 08:55
	Re: recommended drop for lowering a MX83 Cressie	biased99	Tue, 10 June 2003 23:54
	Re: recommended drop for lowering a MX83 Cressie	beerfart	Sun, 08 June 2003 23:54
	Re: recommended drop for lowering a MX83 Cressie	speakafreaka	Wed, 11 June 2003 09:07

Previous Topic:	Turbo Hilux Legalities
Next Topic:	MA61 1UZ v8 conversion

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.