Location: nth ringwood, Victoria
Registered: August 2002
Re: 2T-G big cams
Mon, 09 June 2003 02:04
tighe engineering in brisbane do hard face as does camtec in sydney and clive cams in melbourne ,also remember when you just do aregrind you will loose heaps off the base circle ,then you will have to get shims made up that are about 4mm thick ,where hard faced cam s only take off about 10thou in most cases also if the cam is 2 hot it will crap to drive so think of what you really wont cause most power wont be to 5000 if it is a 1600 with the specs you are talking about ,im running 296 duration and they are 266 at 50 thou so nothing to 5000 and thats a 2 liter 3sge engine and it goes out to 8800 rpm
Mon, 09 June 2003 02:04
