| Author | Topic |
|---|
Location:
Central Coast, NSW
Registered:
May 2002
|
|
Re: 4age aftermarket cams
|
Tue, 10 June 2003 01:36
 
|
 |
Wow those cams are small you might as well not both.. or just get early model bigport cams (MR2 NA) which have 240 degree cams. 0.295" lift.
I would like to fit them if I was going to sell them but if you really want them they are $400 I would part with them for..
see if you put different cams in you MUST check your shim to cam clearances and get new shim. I can get hold of A/M shims for cost price (still expensive). I can dial them in for the person that wants them.
As for the stock computer it can be done you dont need a after market computer. though the MAP sensor may not like it cause cams give you low manifold pressure. Though it should still work just as well.. to break the rumours you CAN have low end and mid range with cams. I had all the power I needed at 3000 ish RPM and 170hp @ 8000RPM max. with these cams in. This was in a stock 100kw motor.
If you are interested in buying them I can put them in for you and dial them up for the cost of the shim. (IF NEEDED) (I bought 14 shims for about $80 a month ago)
|
|
|
| | Subject | Poster | Date |
|---|
 |
4age aftermarket cams
|
king16 | Sun, 01 June 2003 11:35 |
|
Re: 4age aftermarket cams
|
mrshin | Sun, 01 June 2003 12:22 |
|
Re: 4age aftermarket cams
|
Youngy | Sun, 01 June 2003 12:39 |
|
Re: 4age aftermarket cams
|
AZA510 | Mon, 02 June 2003 02:27 |
|
Re: 4age aftermarket cams
|
SecaSX | Mon, 02 June 2003 04:19 |
|
Re: 4age aftermarket cams
|
AZA510 | Wed, 04 June 2003 05:10 |
|
Re: 4age aftermarket cams
|
king16 | Thu, 05 June 2003 07:32 |
|
Re: 4age aftermarket cams
|
TODA AU | Sun, 08 June 2003 14:01 |
|
Re: 4age aftermarket cams
|
kirkosaurus | Sun, 08 June 2003 19:37 |
|
Re: 4age aftermarket cams
|
king16 | Mon, 09 June 2003 03:18 |
|
Re: 4age aftermarket cams
|
kirkosaurus | Mon, 09 June 2003 04:40 |
|
Re: 4age aftermarket cams
|
ae86drift | Mon, 09 June 2003 05:52 |
|
Re: 4age aftermarket cams
|
ae86trueno | Mon, 09 June 2003 06:17 |
|
Re: 4age aftermarket cams
|
SecaSX | Mon, 09 June 2003 06:35 |
|
Re: 4age aftermarket cams
|
ae86trueno | Mon, 09 June 2003 06:50 |
|
Re: 4age aftermarket cams
|
AZA510 | Tue, 10 June 2003 01:36 |
|
Re: 4age aftermarket cams
|
king16 | Tue, 10 June 2003 10:21 |
