F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3s-gte rwd clutch and flywheel Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JustenGT4 Forums Junkie Location: Canberra Registered: June 2003	Re: 3s-gte rwd clutch and flywheel Wed, 11 June 2003 06:17 What gen 3SGRE do you have. The 162 flywheel as per all the n/a flywheels only has a six bolt crank. I had a flywheel made up but only to the same dimensions as a stock Gen II 3SGTE one (but in alloy). All you need to do then is have an extension for the bearing carrier made to get the clutch fork travel sorted. My setup appears to work fine. i didn't need to machine anything off the bellhousing and the input shaft meets the spigot bearing OK (approx 5mm insert) ideally you would still machine the bellhousing to get a deeper fit but seeing the GT4 has no spigot bearing at all i don't see that as a major issue. It's only harmonic you are worried about so it doesn't need much support. email me direct if you have any more questions [Report message to a moderator]

	Subject	Poster	Date
	3s-gte rwd clutch and flywheel	gabe	Tue, 10 June 2003 08:42
	Re: 3s-gte rwd clutch and flywheel	Cool1	Tue, 10 June 2003 09:02
	Re: 3s-gte rwd clutch and flywheel	TurboRG	Tue, 10 June 2003 22:57
	Re: 3s-gte rwd clutch and flywheel	gabe	Wed, 11 June 2003 05:11
	Re: 3s-gte rwd clutch and flywheel	JustenGT4	Wed, 11 June 2003 06:17
	Re: 3s-gte rwd clutch and flywheel	Cool1	Wed, 11 June 2003 07:11
	Re: 3s-gte rwd clutch and flywheel	TA22-3SGTE	Wed, 11 June 2003 10:14
	Re: 3s-gte rwd clutch and flywheel	gabe	Fri, 13 June 2003 13:26
	Re: 3s-gte rwd clutch and flywheel	CelicaRA45	Sat, 14 June 2003 03:54
	Re: 3s-gte rwd clutch and flywheel	TA22-3SGTE	Sat, 14 June 2003 09:44
	Re: 3s-gte rwd clutch and flywheel	turbocamry	Mon, 16 June 2003 08:37
	Re: 3s-gte rwd clutch and flywheel	gabe	Mon, 16 June 2003 13:47
	Re: 3s-gte rwd clutch and flywheel	Cool1	Mon, 16 June 2003 13:49
	Re: 3s-gte rwd clutch and flywheel	gabe	Mon, 16 June 2003 15:14
	Re: 3s-gte rwd clutch and flywheel	Cool1	Mon, 16 June 2003 23:21
	Re: 3s-gte rwd clutch and flywheel	CelicaRA45	Tue, 17 June 2003 05:33
	Re: 3s-gte rwd clutch and flywheel	purpleminiep	Mon, 16 June 2003 22:43

Previous Topic:	What box should i use in the 1j cressi
Next Topic:	18RGU emissions info needed for RWC

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.