| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: HELP!! GZE s/c issues
|
Fri, 13 June 2003 05:45
 
|
 |
 the s/c spinning all the time will not effect your idle.
the ABV is open at idle.
i had a fixed pulley on mine, and the idle was fine.
my old s/c which had the clutch would still spin it idle, but it wasnt engaged. it would look like it was, but it must of been a little drag on the clutch set-up?.
if i grabbed hold of the inner bit of the s/c pulley, it would stop spinning. and if i gave it a rev from the throttle body, i could see it engage and hear the small click.
the s/c is spose to be operated/engaged when the ECU picks up a certain level in your vacum (i'm not sure how vacum is measured, but noramlly when it got to -8 on my guage it would engage).
you can actually drive a gze with-out the s/c engaging if you dont apply much throttle.
|
|
|
| | Subject | Poster | Date |
|---|
 |
HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 02:54 |
|
Re: HELP!! GZE s/c issues
|
xpimp | Fri, 13 June 2003 04:54 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 04:57 |
|
Re: HELP!! GZE s/c issues
|
feral4mr2 | Fri, 13 June 2003 05:45 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 05:58 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 06:01 |
|
Re: HELP!! GZE s/c issues
|
sideshow | Fri, 13 June 2003 06:09 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 06:12 |
|
Re: HELP!! GZE s/c issues
|
sideshow | Fri, 13 June 2003 07:05 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Fri, 13 June 2003 07:07 |
|
Re: HELP!! GZE s/c issues
|
whiteGZE | Sat, 14 June 2003 06:08 |
|
Re: HELP!! GZE s/c issues
|
Sprocket | Sun, 15 June 2003 01:51 |
