| Author | Topic |
|---|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: 4A-GE into AE86 sprinter
|
Sun, 30 June 2002 09:33
 
|
 |
That 100Kw motor is FWD, so you won't be able to use the g'box & the motor will need a bit of modification to fit RWD. You should get an 88Kw RWD 4A-GE and gearbox, this will be alot easier to fit.
If you want to turbo a 4A though, your best bet is to get a 4A-GZE, a FWD supercharged variant. Use this motor, but get rid of the supercharger, then use the 88Kw head & intake manifold, and whack a turbo on it.
There's many ways you can approach the road to a turbo, go the whole hog from the start, might be cheaper & you won't get a much experience, or start with the RWD 88Kw motor and get the other bits later, and learn a whole lot more along the way.
These forums are a good place to start though, try searching for previous threads on the same topic, there are quite a few of them. Mostly in the old forums.....
|
|
|
| | Subject | Poster | Date |
|---|
 |
4A-GE into AE86 sprinter
|
jogger | Sun, 30 June 2002 08:53 |
|
Re: 4A-GE into AE86 sprinter
|
BigWorm | Sun, 30 June 2002 09:33 |
|
Re: 4A-GE into AE86 sprinter
|
jogger | Sun, 30 June 2002 10:58 |
|
Re: 4A-GE into AE86 sprinter
|
EVOSTi | Sun, 30 June 2002 11:43 |
|
Re: 4A-GE into AE86 sprinter
|
jogger | Sun, 30 June 2002 12:08 |
|
Re: 4A-GE into AE86 sprinter
|
EVOSTi | Sun, 30 June 2002 12:39 |
|
Re: 4A-GE into AE86 sprinter
|
jogger | Mon, 01 July 2002 01:13 |
|
Re: 4A-GE into AE86 sprinter
|
fergo308 | Mon, 01 July 2002 10:47 |
|
Re: 4A-GE into AE86 sprinter
|
EVOSTi | Mon, 01 July 2002 11:26 |
|
Re: 4A-GE into AE86 sprinter
|
BigWorm | Mon, 01 July 2002 15:44 |
|
Re: 4A-GE into AE86 sprinter
|
Ribbo | Mon, 01 July 2002 20:44 |
|
Re: 4A-GE into AE86 sprinter
|
fergo308 | Mon, 01 July 2002 20:59 |
|
Re: 4A-GE into AE86 sprinter
|
Ribbo | Mon, 01 July 2002 21:08 |
|
Re: 4A-GE into AE86 sprinter
|
fergo308 | Tue, 02 July 2002 09:14 |
