| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: electronic ignition for 2tg
|
Wed, 18 June 2003 11:33
 
|
 |
is it a 4 wire or 5 wire ignitor? (dunno if a 4 wire exists..)
i just recently modified my 18R-G points dizzy with 22R-E electronic dizzy internals and used a 21R-C coil+ignitor, and got it working 110%.
There should be only two wires you have to connect to the car itself - that being the Ignition (12V+) wire and tacho wire.
From the ignitor, i had these 5 wires:
- one going to the (-) terminal of the coil
- one going to the (+) of the coil, which is also where ignition from the car is connected
- One going to the tacho wire from the car
- and two going to the electronic dizzy.
I hope this helps. I don't know if the 2T-GEU electronic ignition runs the same as what i used......
|
|
|
