| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2002
|
|
Re: AW11 GZE Turbo Manifold..
|
Tue, 24 June 2003 13:01
 
|
 |
The whole lot, both flanges and all tubes were all cut and finished using hacksaw/drill and file. Yes, very tough on my delicate girlie hands  ...
Welded by MIG.
A burr is a cutting tip that is used in the end of a die grinder. The die grinder is what i used to basically smooth the internal surface of the thing. Its easy to see how well it works looking straight down the collector.
|
|
|
| | Subject | Poster | Date |
|---|
 |
AW11 GZE Turbo Manifold..
|
Corvid | Mon, 23 June 2003 23:22 |
|
Re: AW11 GZE Turbo Manifold..
|
rollaboy | Tue, 24 June 2003 05:10 |
|
Re: AW11 GZE Turbo Manifold..
|
Rex_Kelway | Tue, 24 June 2003 10:42 |
|
Re: AW11 GZE Turbo Manifold..
|
Cool1 | Tue, 24 June 2003 10:47 |
|
Re: AW11 GZE Turbo Manifold..
|
feral4mr2 | Tue, 24 June 2003 10:55 |
|
Re: AW11 GZE Turbo Manifold..
|
Cool1 | Tue, 24 June 2003 11:13 |
|
Re: AW11 GZE Turbo Manifold..
|
Rex_Kelway | Tue, 24 June 2003 13:01 |
|
Re: AW11 GZE Turbo Manifold..
|
feral4mr2 | Tue, 24 June 2003 23:21 |
|
Re: AW11 GZE Turbo Manifold..
|
Cool1 | Tue, 24 June 2003 13:05 |
|
Re: AW11 GZE Turbo Manifold..
|
Grega | Tue, 24 June 2003 20:57 |
|
Re: AW11 GZE Turbo Manifold..
|
Rex_Kelway | Wed, 25 June 2003 11:11 |
|
Re: AW11 GZE Turbo Manifold..
|
Cool1 | Wed, 25 June 2003 11:55 |
|
Re: AW11 GZE Turbo Manifold..
|
Grega | Wed, 25 June 2003 21:00 |
