| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 Re: 3T-GTE / 2T-G Hybrid
|
Tue, 24 June 2003 23:26
 
|
 |
xxaccoxx
For a N/A Hybrid you are Basically building a Big Bore 2T-G (or 3T-G as they are also refered)
In the N/A application things are indeed different. COmpression ratio's are desired to be alot Higher so you will not be using 3T-GTE pistons. As Such 3T-C pistons can be used but they will need to be Flycut and depending on your budget a nice High compression and oversize Set can make a nice improvemet.
If your on a tight budget you can get a 1mm oversize set that yeilds 9.8:1 compression for around $300. (At least you could)
As for the best computer... Theres alot out there and there specs change all the time so get one that best suits your needs. Things to consider are the load points, Number of extra outputs, Ease of tuning, if it has a handset etc etc theres alot of considerations.
Personally the Wolf 3D or 4D looks good, I was happy with the EMS and I'll be using Autronic on the next one.
|
|
|
