| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 2T-C performance
|
Tue, 24 June 2003 23:48
 
|
 |
Pete,
There is alot of info on these forums about the 2T but its hard to find as that search for "2T" doesn't work to well for some reason 
As for your using the 3T head yes it does bolt onto a 2T block BUT you want to do it the other way round ! Use the 3T bottom end to increase the capacity to 1788cc. The 3T has a longer stroke on the Crank. You can also bore the engine "safely" by 3.5mm if you were really chasing some extra performance. 3T-C's have low compression and actually produce less HP than the 2T-C in stock trim so some high compression pistons are a good investment.
Theres a little bit of info here:
http://forums.toymods.org.au/index.php?t=msg&t h=9992
And to really torment the sences and brake the bank check the two links in this thread !
http://forums.toymods.org.au/index.php?t=msg&t h=12854
Hope that helps.
|
|
|
| | Subject | Poster | Date |
|---|
 |
2T engine mods - need help/advice
|
TA22 Newbie | Tue, 24 June 2003 23:11 |
|
Re: 2T engine mods - need help/advice
|
sleeka73 | Tue, 24 June 2003 23:27 |
|
Re: 2T engine mods - need help/advice
|
silverfox | Tue, 24 June 2003 23:38 |
|
2T-C performance
|
thetoyman75 | Tue, 24 June 2003 23:48 |
|
Re: 2T-C performance
|
Classique71 | Wed, 25 June 2003 08:33 |
|
Re: 2T-C performance
|
TA22 Newbie | Wed, 25 June 2003 10:16 |
|
Re: 2T engine mods - need help/advice
|
silverfox | Wed, 25 June 2003 11:35 |
|
Re: 2T engine mods - need help/advice
|
thetoyman75 | Wed, 25 June 2003 12:24 |
|
Re: 2T engine mods - need help/advice
|
TA22 Newbie | Thu, 26 June 2003 00:07 |
|
Re: 2T engine mods - need help/advice
|
Norbie | Wed, 25 June 2003 22:59 |
