F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Problems that can be faced performing an engine conversion Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
lumpy Forums Junkie Location: Adelaide, SA Registered: May 2002	Re: Problems that can be faced performing an engine conversion Mon, 01 July 2002 11:32 Forget the 7M go the 1jz! I thought the 7M to 1 jz would be finished in 2 weekends! Problems were mainly due to plumbing and wiring - if you want to keep everything working and looking standard there is a LOT of mucking around. But with the JZA crossmember, almost everything either bolted in or had a little plug in the bolt hole which you pull out and then it bolts in! Seriously you will need a JZA-70 front cut coz most parts in the engine bay were swapped from JZA to MA. To just buy an engine and get the rest as parts would be a real headache. Good Luck! (don't get a damaged front cut - you probably need the radiator, intercooler, power steering oil cooler, engine fan oil cooler, air-conditioning pump and a straight crossmember!) [Report message to a moderator]

	Subject	Poster	Date
	Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 04:50
	Re: Problems that can be faced performing an engine conversion	Fattony	Sun, 30 June 2002 05:22
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 08:00
	Re: Problems that can be faced performing an engine conversion	Norbie	Sun, 30 June 2002 08:00
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 08:08
	Re: Problems that can be faced performing an engine conversion	GTMR2	Sun, 30 June 2002 08:23
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 11:48
	Re: Problems that can be faced performing an engine conversion	GTMR2	Sun, 30 June 2002 13:49
	Re: Problems that can be faced performing an engine conversion	TA22-3SGTE	Sun, 30 June 2002 14:35
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 14:29
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 14:55
	Re: Problems that can be faced performing an engine conversion	Esteban	Sun, 30 June 2002 15:45
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Sun, 30 June 2002 16:13
	Re: Problems that can be faced performing an engine conversion	draven	Mon, 01 July 2002 06:05
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Mon, 01 July 2002 08:46
	Re: Problems that can be faced performing an engine conversion	GTMR2	Mon, 01 July 2002 10:40
	Re: Problems that can be faced performing an engine conversion	lumpy	Mon, 01 July 2002 11:32
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Mon, 01 July 2002 11:43
	Re: Problems that can be faced performing an engine conversion	draven	Mon, 01 July 2002 11:45
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Mon, 01 July 2002 11:47
	Re: Problems that can be faced performing an engine conversion	draven	Mon, 01 July 2002 11:50
	Re: Problems that can be faced performing an engine conversion	Rattlehead	Mon, 01 July 2002 12:25

Previous Topic:	New addition to the K-Mac swaybar line-up...
Next Topic:	engine bay air flow

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.