F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3KR - How hard would it be to achieve? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Grega Forums Junkie I supported Toymods Location: melbourne.victoria.austra... Registered: June 2002	Re: 3KR - How hard would it be to achieve? Thu, 26 June 2003 02:53 i hear ya. remember tho - k motor head is alloy. alloy can be heated and welded though so things like head bolt holes don't pose much in the way of a problem BUT making sure there is room for the bolt - that could be a problem. yes to same bore spacing. you could deal with a mm here or there and weld up/reshape the combustion chamber, again, would make it pretty hard methinks. custom head gasket well, no, not really. you make the surface of the head the same as the block as use the headgasket for that motor (if you get what i mean) oil feeds and water jackets - now that bit would be a challenge - one that might actually kill off the idea to be honest. some massive work would be needed there. indexing cam gears and getting the rotation right, well, for arguments sake if you used 4AG cam gears and then from a billet cam had a "dummy" made up to drive the distributor/oil pump and removed the lobes for the pushrods - you could actually put a keyway in it and use the gear from the crank of the 4AG. just a thought. this all sounds pretty silly but VERY interesting at the same time. [Report message to a moderator]

	Subject	Poster	Date
	3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 22:40
	Re: 3KR - How hard would it be to achieve?	Blaze	Wed, 25 June 2003 22:55
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 23:43
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 00:04
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:42
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:56
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 02:53
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 03:47
	Re: 3KR - How hard would it be to achieve?	pro_ke	Thu, 26 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Thu, 26 June 2003 06:31
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 07:46
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 08:51
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 08:54
	Re: 3KR - How hard would it be to achieve?	chrisss	Thu, 26 June 2003 09:21
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 13:26
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 09:16
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 09:22
	Re: 3KR - How hard would it be to achieve?	Jonny2TG	Thu, 26 June 2003 09:38
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 11:09
	Re: 3KR - How hard would it be to achieve?	EMP-2TG	Thu, 26 June 2003 11:32
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 23:59
	Re: 3KR - How hard would it be to achieve?	pro_ke	Fri, 27 June 2003 14:23
	Re: 3KR - How hard would it be to achieve?	Grega	Sat, 28 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	sideshow	Sat, 28 June 2003 11:58
	Re: 3KR - How hard would it be to achieve?	purpleminiep	Sat, 28 June 2003 12:49
	Re: 3KR - How hard would it be to achieve?	TE35	Sat, 28 June 2003 14:28
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Sun, 29 June 2003 10:00
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Wed, 02 July 2003 08:24
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 02 July 2003 09:33

Previous Topic:	18RG Emissions check and tune
Next Topic:	ae92 struts/brakes in to ae82-direct swap??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.