F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3KR - How hard would it be to achieve? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Purple_Beasty Regular Location: New Zealand Registered: May 2002	Re: 3KR - How hard would it be to achieve? Thu, 26 June 2003 06:31 Probably look to the 2TG and 3T-GTE motors for ideas. These both run dummy shafts to run the oil pump etc. Using chain drive rather than belt may make it easier to get the chain the right length as you just shorten to suit and could adapt 2TG tensioners etc. If you were going to do it you would want to start with the 7K so at least you have decent capacity to get greatest benefit and you are dealing with a fairly fresh engine block. I would be looking to engines such as the 4E-FTE for an appropriate cylinder head, may be closer to the correct bore spacing. Having said all that, will it be worthwhile? Is the twin cam going to provide that much of a benefit? Remember, many of the fastest 4 cylinder drag cars in the world (7 sec bracket) actually use the pushrod 3TC motors. Callum [Report message to a moderator]

	Subject	Poster	Date
	3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 22:40
	Re: 3KR - How hard would it be to achieve?	Blaze	Wed, 25 June 2003 22:55
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 23:43
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 00:04
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:42
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:56
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 02:53
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 03:47
	Re: 3KR - How hard would it be to achieve?	pro_ke	Thu, 26 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Thu, 26 June 2003 06:31
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 07:46
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 08:51
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 08:54
	Re: 3KR - How hard would it be to achieve?	chrisss	Thu, 26 June 2003 09:21
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 13:26
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 09:16
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 09:22
	Re: 3KR - How hard would it be to achieve?	Jonny2TG	Thu, 26 June 2003 09:38
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 11:09
	Re: 3KR - How hard would it be to achieve?	EMP-2TG	Thu, 26 June 2003 11:32
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 23:59
	Re: 3KR - How hard would it be to achieve?	pro_ke	Fri, 27 June 2003 14:23
	Re: 3KR - How hard would it be to achieve?	Grega	Sat, 28 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	sideshow	Sat, 28 June 2003 11:58
	Re: 3KR - How hard would it be to achieve?	purpleminiep	Sat, 28 June 2003 12:49
	Re: 3KR - How hard would it be to achieve?	TE35	Sat, 28 June 2003 14:28
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Sun, 29 June 2003 10:00
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Wed, 02 July 2003 08:24
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 02 July 2003 09:33

Previous Topic:	18RG Emissions check and tune
Next Topic:	ae92 struts/brakes in to ae82-direct swap??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.