F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3KR - How hard would it be to achieve? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Grega Forums Junkie I supported Toymods Location: melbourne.victoria.austra... Registered: June 2002	Re: 3KR - How hard would it be to achieve? Sat, 28 June 2003 04:53 i compared a 4AGE head this morning onto a K motor block. actually i borrowed a 4AGE headgasket and tried it on the K motor block - there is NOT MUCH IN IT. the combustion chambers, well, practically sit in the same spots. a couple of holes with the water jackets line up, and most of the bolt holes for the head actually line up too. i think there are three which would need the 4A head bolt holes filling and then re-drilling about 2mm inwards and you'd be done. the only thing you would need to do is cover up where the pushrods sit. the only thing about the combustion chambers is there is a difference in piston size between the two, which would make the chamber hang over the metal between the cylinders (between the bores is what i'm trying to say) next will be to get myself a shitter K motor... the quest continues. [Report message to a moderator]

	Subject	Poster	Date
	3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 22:40
	Re: 3KR - How hard would it be to achieve?	Blaze	Wed, 25 June 2003 22:55
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 25 June 2003 23:43
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 00:04
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:42
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 05:56
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 02:53
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 03:47
	Re: 3KR - How hard would it be to achieve?	pro_ke	Thu, 26 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Thu, 26 June 2003 06:31
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 07:46
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 08:51
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 08:54
	Re: 3KR - How hard would it be to achieve?	chrisss	Thu, 26 June 2003 09:21
	Re: 3KR - How hard would it be to achieve?	oldcorollas	Thu, 26 June 2003 13:26
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 09:16
	Re: 3KR - How hard would it be to achieve?	gianttomato	Thu, 26 June 2003 09:22
	Re: 3KR - How hard would it be to achieve?	Jonny2TG	Thu, 26 June 2003 09:38
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Thu, 26 June 2003 11:09
	Re: 3KR - How hard would it be to achieve?	EMP-2TG	Thu, 26 June 2003 11:32
	Re: 3KR - How hard would it be to achieve?	Grega	Thu, 26 June 2003 23:59
	Re: 3KR - How hard would it be to achieve?	pro_ke	Fri, 27 June 2003 14:23
	Re: 3KR - How hard would it be to achieve?	Grega	Sat, 28 June 2003 04:53
	Re: 3KR - How hard would it be to achieve?	sideshow	Sat, 28 June 2003 11:58
	Re: 3KR - How hard would it be to achieve?	purpleminiep	Sat, 28 June 2003 12:49
	Re: 3KR - How hard would it be to achieve?	TE35	Sat, 28 June 2003 14:28
	Re: 3KR - How hard would it be to achieve?	Purple_Beasty	Sun, 29 June 2003 10:00
	Re: 3KR - How hard would it be to achieve?	Bill Sherwood	Wed, 02 July 2003 08:24
	Re: 3KR - How hard would it be to achieve?	Grega	Wed, 02 July 2003 09:33

Previous Topic:	18RG Emissions check and tune
Next Topic:	ae92 struts/brakes in to ae82-direct swap??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.