Author | Topic |
I supported Toymods
Location: Berowra-Sydney
Registered: July 2002
|
Re: Join the Dots on brake fluid???
|
Sat, 05 July 2003 08:26
|
|
also ae86drift,
best way i see to flush out a brake system is get an air compressor and a brake bleeder which is just a bottle that connects in the air line and sucks in through a tube,
Stick the tube in the master cylinder and suck all the fluid out, then top up with new stuff
Then go to the back left and suck the fluid out until you start to see the new fluid coming through then close the nipple and open slightly until you see no more slight bubles coming out then close off, then do the same to the right rear, then the left front then the right front and your brakes are bled
make sure you top up the master cylinder with new fluid while you do it so it doesn't run out.
|
|
|
| Subject | Poster | Date |
|
Join the Dots on brake fluid???
|
GIN51E | Sat, 05 July 2003 04:14 |
|
Re: Join the Dots on brake fluid???
|
wastegate | Sat, 05 July 2003 04:32 |
|
Re: Join the Dots on brake fluid???
|
manipulate | Sat, 05 July 2003 05:23 |
|
Re: Join the Dots on brake fluid???
|
gianttomato | Sat, 05 July 2003 05:43 |
|
Re: Join the Dots on brake fluid???
|
manipulate | Sat, 05 July 2003 05:46 |
|
Re: Join the Dots on brake fluid???
|
gianttomato | Sat, 05 July 2003 05:55 |
|
Re: Join the Dots on brake fluid???
|
ae86drift | Sat, 05 July 2003 06:15 |
|
Re: Join the Dots on brake fluid???
|
gianttomato | Sat, 05 July 2003 08:26 |
|
Re: Join the Dots on brake fluid???
|
GIN51E | Sat, 05 July 2003 08:21 |
|
Re: Join the Dots on brake fluid???
|
GIN51E | Sat, 05 July 2003 08:26 |