F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » I hope I didn't need that - 1jz component Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
sideshow Forums Junkie Location: sydney Registered: March 2003	Re: I hope I didn't need that - 1jz component Wed, 09 July 2003 07:25 hey those heater wires are on a small 2 pin plug just after the harness comes out of the firewall there is these 2 wires one is black n yellow i think or just black the other is yellow i think when u turn the heater to hot it sends 12v to the solenoid which then usues vacuum to open the heater tap these wires go inside to one of the big plugs its not a cheap job to convert from hydraulic to thermo fans i think from toyota i saw say 200 to 300 for water pump,200 for pulley plus another 300 for big blade fan that bolts to pulley or u can use big thermo which ios about 200 maybe it doesnt seem like much but then when u add up all the little shit u have to get it gets expensive best way to run the thermo is to buy as temp sensor and put it in the top rad hose or near the thrmostat i did a 1j b4 and we bolted a 4age throm fan sensor in the spot near the thrmo fan then ran a relay to turn fan on less hassle than tryin to get microtech to do it and it gives u an extra output on microtech [Report message to a moderator]

	Subject	Poster	Date
	I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 05:44
	Re: I hope I didn't need that - 1jz component	Nark	Mon, 07 July 2003 06:07
	Re: I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 06:18
	Re: I hope I didn't need that - 1jz component	thunderbird1	Mon, 07 July 2003 06:18
	Re: I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 06:19
	Re: I hope I didn't need that - 1jz component	sideshow	Mon, 07 July 2003 06:46
	Re: I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 07:41
	Re: I hope I didn't need that - 1jz component	gianttomato	Mon, 07 July 2003 09:02
	Re: I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 09:13
	Re: I hope I didn't need that - 1jz component	gianttomato	Mon, 07 July 2003 09:52
	Re: I hope I didn't need that - 1jz component	draven	Mon, 07 July 2003 09:54
	Re: I hope I didn't need that - 1jz component	thunderbird1	Mon, 07 July 2003 11:08
	Re: I hope I didn't need that - 1jz component	Norbie	Mon, 07 July 2003 23:04
	Re: I hope I didn't need that - 1jz component	draven	Tue, 08 July 2003 05:25
	Re: I hope I didn't need that - 1jz component	Norbie	Tue, 08 July 2003 06:56
	Re: I hope I didn't need that - 1jz component	draven	Tue, 08 July 2003 07:27
	Re: I hope I didn't need that - 1jz component	draven	Tue, 08 July 2003 08:40
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 05:25
	Re: I hope I didn't need that - 1jz component	Norbie	Wed, 09 July 2003 06:01
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 06:23
	Re: I hope I didn't need that - 1jz component	Norbie	Wed, 09 July 2003 06:49
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 07:13
	Re: I hope I didn't need that - 1jz component	sideshow	Wed, 09 July 2003 07:25
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 12:13
	Re: I hope I didn't need that - 1jz component	Norbie	Wed, 09 July 2003 10:04
	Re: I hope I didn't need that - 1jz component	sideshow	Wed, 09 July 2003 12:30
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 12:39
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 12:51
	Re: I hope I didn't need that - 1jz component	sideshow	Wed, 09 July 2003 13:11
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 19:50
	Re: I hope I didn't need that - 1jz component	draven	Thu, 10 July 2003 00:32
	Re: I hope I didn't need that - 1jz component	draven	Wed, 09 July 2003 20:01

Previous Topic:	4a-gze conversion advice
Next Topic:	4agze vacume hoses

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.