| Author | Topic |
|---|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: Chroming & Polishing
|
Wed, 03 July 2002 15:11
 
|
 |
Hey puffy, was that inlet temps or exhaust temps that were reduced, and if it was exhaust, where was the temp measured from?
The exhaust temp downstream of the turbo should be hotter as less heat is being transmitted throught the downpipe, and the gass moves faster, 'cos hotter exhaust gas = higher gas velocity....
|
|
|
