| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: wiring diagram for RA40? anyone?
|
Sat, 12 July 2003 15:32
 
|
 |
hiya Brett!
hows the Supra? 
am going to redo some of the ign wiring first - plus actually note down the wiring for the timer & alarm. I've put an ammeter on the power out of the battery and the only thing pulling joice is the alarm when armed ;(
i remember you saying the bundamba guys wired up your 1g-gte install but figured they'd have same hassles as me getting an actual wiring diagram. i'll contact them if luck doesn't turn my way
fwiw, i think part of the problem is that the starter is pulling too much juice (prob a dodgy solenoid or windings) plus the ign coil's not wired correctly so it's only getting 6-8 volts for spark when starting (plus there's a growing number of earth problemsr). so the longer i crank at the start, the worse battery gets and the less (if any) spark i get. .... anyway it sounds like a good theory?
btw: 1g-gte is out of the yellow car (have been distracted until recently).
regards,
Charles
|
|
|
