Author | Topic |

Location: Kenthurst, Sydney
Registered: February 2003
|
Re: hooking up boost guage
|
Thu, 17 July 2003 02:42
|
 |
if it is mechanical then there will be a brass fitting on the back. Clear plastic tubing goes from there to your plenum. You use brass "olive" fittings on the end of the tube.
it will still have wiring, this is for the illumination. You can hook it straight up to an ignition fed +12V or you can hook it up to the existing dash lighting feed on your dash so that the light comes on only when your headlights are on. Grab a test light and poke around under the dash till you find the dash illumination feed (test light will come on with the headlights)
|
|
|