Author | Topic |

Club President I supported Toymods
Location: Sydney
Registered: May 2002
|
Re: 2TG 1600 to a 2ltr conversion????
|
Fri, 05 July 2002 03:33

|
 |
Cool 1,
Block heights are all the same.
It is only the crank and Pistons that change the Conrods are also all the same length.
If you use the 3TGTEU pistons it will be a PIG in N/A form. 3TGTEU pistons are around 8.0:1 comprerssion so not good unless you are Turboing or Supercharging it. Flycutting requirements also depend on cam lift and Timing. Different settings push the Valves Further into the Combustion Chamber.
|
|
|
| Subject | Poster | Date |
 |
2TG 1600 to a 2ltr conversion????
|
7mgtema71 | Fri, 28 June 2002 07:45 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Celica RA45 | Fri, 28 June 2002 11:39 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
7mgtema71 | Sun, 30 June 2002 23:10 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Celica RA45 | Mon, 01 July 2002 07:01 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
7mgtema71 | Mon, 01 July 2002 07:33 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Celica RA45 | Mon, 01 July 2002 09:30 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
BigBadBenny | Mon, 01 July 2002 10:19 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Cool1 | Mon, 01 July 2002 13:30 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Thu, 04 July 2002 11:09 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Cool1 | Thu, 04 July 2002 12:15 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Thu, 04 July 2002 22:10 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Cool1 | Thu, 04 July 2002 23:49 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Syco2t | Fri, 05 July 2002 02:46 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Fri, 05 July 2002 03:33 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Cool1 | Fri, 05 July 2002 03:50 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Fri, 05 July 2002 06:00 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Karl_skewes | Tue, 09 July 2002 05:33 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Tue, 09 July 2002 05:51 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Karl_skewes | Tue, 09 July 2002 06:26 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Jonny2TG | Tue, 09 July 2002 13:29 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Karl_skewes | Tue, 09 July 2002 22:16 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
thetoyman75 | Wed, 10 July 2002 00:21 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Jonny2TG | Wed, 10 July 2002 14:51 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
Karl_skewes | Wed, 10 July 2002 20:58 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
purpleminiep | Thu, 11 July 2002 02:07 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
SeptemberSquallIndustries | Fri, 06 February 2004 11:15 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
hemi twofifteen turbo | Sat, 07 February 2004 01:03 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
CelicaRA45 | Sat, 07 February 2004 01:52 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
T APLUS 22 | Sat, 07 February 2004 07:01 |
 |
Re: 2TG 1600 to a 2ltr conversion????
|
CelicaRA45 | Sat, 07 February 2004 07:57 |