| Author | Topic |
|---|
Location:
cambo
Registered:
May 2002
|
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
Sun, 20 July 2003 11:10
 
|
 |
$25 each thats better than most places.
mrshin, i thought i was sorta doing it properly. i bought approx $240 worth of stainless steel mandrel bends from an exhaust shop at about $25 each, that was the cheapest i could find it. then i marked it all up and had it welded and pressure tested for $75, then got a few turbo hoses for $35. im starting to wish i had just paid an ehaust shop like $500+ to get it over and done with.
oh and you know how i had about 15cms of just hose, well i got some offcuts of the pipe and stuck it in the hoses, leaving about a 3cm gap and it still sucks in hard. ohwell more money on the way 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Sun, 13 July 2003 12:19 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Mon, 14 July 2003 11:06 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
TurboRA28 | Mon, 14 July 2003 23:06 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
cambelt | Tue, 15 July 2003 01:51 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Tue, 15 July 2003 02:55 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
cambelt | Sat, 19 July 2003 10:33 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
MAZMAN | Tue, 15 July 2003 10:57 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Wed, 16 July 2003 08:55 |
|
hell pissed
|
EVOSTi | Thu, 17 July 2003 08:42 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
mrshin | Thu, 17 July 2003 12:03 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Sun, 20 July 2003 11:10 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
mrshin | Sun, 20 July 2003 11:38 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
EVOSTi | Mon, 21 July 2003 08:57 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
pannelvan_screema | Mon, 21 July 2003 10:47 |
|
Re: Where to get i/c hoses, 45 degree bends + some wierd ones?
|
FLY PSI | Mon, 21 July 2003 10:56 |
