Author | Topic |

Location: MACKAY
Registered: May 2002
|
Re: Water Injection Pump...
|
Tue, 22 July 2003 12:03

|
 |
OK a tested and proven method to stop detonation and increase power ..
Stainless steel tank ( 4ltrs or so ) efi pump , pressure regulator , 2 Hobbs switches , a relay , some efi line , large injector .
Set this up the same as for standard efi system , fit the injector about 300mm before the throttle body ( this gives time for atomization and equal distribution ) wire the injector up to one of your existing injectors via a Hobbs switch , wire the pump up via a relay and the other Hobbs switch , set the Hobbs switch for the pump to about one lb and the Hobbs switch for the injector to what ever boost you want it to start , make sure you use a injector with the same impedance as the one's in your motor , This is not for water injection but for Methanol injection , You can't use straight Methanol as there is no lubricant in it and the pump need to be lubed , So the best mixture I have found is to 1 liter of methanol add 50 ML of mineral turps ( This acts as a cleaner for the system ) and 20 ML of Castrol M ( This is the lubricant for the pump ) .
Any other Q's .
Trevor
|
|
|
| Subject | Poster | Date |
 |
Water Injection Pump...
|
ed_ma61 | Tue, 22 July 2003 04:45 |
 |
Re: Water Injection Pump...
|
YelloRolla | Tue, 22 July 2003 08:08 |
 |
Re: Water Injection Pump...
|
roger | Tue, 22 July 2003 08:15 |
 |
Re: Water Injection Pump...
|
Cool1 | Tue, 22 July 2003 09:06 |
 |
Re: Water Injection Pump...
|
ed_ma61 | Tue, 22 July 2003 10:00 |
 |
Re: Water Injection Pump...
|
Cool1 | Tue, 22 July 2003 10:14 |
 |
Re: Water Injection Pump...
|
TA22-3SGTE | Tue, 22 July 2003 12:03 |
 |
Re: Water Injection Pump...
|
Allan | Tue, 22 July 2003 13:02 |
 |
Re: Water Injection Pump...
|
Joshstix | Wed, 23 July 2003 00:18 |
 |
Re: Water Injection Pump...
|
ed_ma61 | Wed, 23 July 2003 00:31 |
 |
Re: Water Injection Pump...
|
Joshstix | Wed, 23 July 2003 00:53 |
 |
Re: Water Injection Pump...
|
ed_ma61 | Wed, 23 July 2003 01:01 |
 |
Re: Water Injection Pump...
|
Allan | Wed, 23 July 2003 01:56 |