| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Supra 6 speed to 1UZFE
|
Tue, 22 July 2003 13:39
 
|
 |
Adaptor plate will be a 30mm thick slab of alloy and is going to set you back a LARGE ammount of money and set the box back aswell, unless you have a spare block to jig it on, your own mill or a mate with one i would say forget it!
Cut and shut a auto bellhousing onto the V160 will be a large job but probably the way to go, make shure its a REALLY good weld job with a few strips of alloy welded across as stichs last thing you want is a v160 falling out!
Allan
|
|
|
| | Subject | Poster | Date |
|---|
 |
Supra 6 speed to 1UZFE
|
V8villain | Sat, 19 July 2003 12:05 |
|
Re: Supra 6 speed to 1UZFE
|
draven | Sat, 19 July 2003 12:07 |
|
Re: Supra 6 speed to 1UZFE
|
Cyber-punk | Sat, 19 July 2003 14:36 |
|
Re: Supra 6 speed to 1UZFE
|
Nark | Sat, 19 July 2003 14:40 |
|
Re: Supra 6 speed to 1UZFE
|
gianttomato | Sat, 19 July 2003 15:53 |
|
Re: Supra 6 speed to 1UZFE
|
SupraPete | Sun, 20 July 2003 10:01 |
|
Re: Supra 6 speed to 1UZFE
|
Cyber-punk | Sun, 20 July 2003 15:15 |
|
Re: Supra 6 speed to 1UZFE
|
Nark | Sun, 20 July 2003 23:28 |
|
Re: Supra 6 speed to 1UZFE
|
Joshstix | Mon, 21 July 2003 03:28 |
|
Re: Supra 6 speed to 1UZFE
|
trev64 | Tue, 22 July 2003 10:44 |
|
Re: Supra 6 speed to 1UZFE
|
Allan | Tue, 22 July 2003 13:42 |
|
Re: Supra 6 speed to 1UZFE
|
Allan | Tue, 22 July 2003 13:39 |
|
Re: Supra 6 speed to 1UZFE
|
need_boost | Tue, 22 July 2003 13:47 |
