F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 4AGE 20v or 4AGE 16v???? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Rex_Kelway Forums Junkie Location: Adelaide Registered: May 2002	Re: 4AGE 20v or 4AGE 16v???? Wed, 23 July 2003 07:57 To put it honest/straight If you want a stock engine, then 20V. Being factory it behaves well is smooth and pretty ballsy in the grand scheme of factory 1600s You mention that the car will be primarily a racer, Then if you are looking to modify it i would go straight for the 86kw Bigport 16V. My reasons are as follows: Performance per dollar after modifications will be much greater. For example Big agressive cams for the 16V are more common (and hence cheaper) for the thing as are pistons etc. The bigport head is also better than the smallport for all out applications. Or try it as follows, - 20V (7 rib) bottom end with rods and crank - Custom high compression pistons - Bigport head with decent cams - Aftermarket EFI There is much more that can be done, Take Bills 200Hp+ N/A 16V 4AGE for example, but if i was doing some club racing for low/moderate dollars then this is how id go Sure the 20V would be just as good, if not better but the amount of money could also be more simply because the parts are not as common. I havent actully built myself a tough 4AGE yet but i have been on Toymods for a while, done plenty of research and seen my fair share of High performance project and race cars. But dont think im an expert by any stretch. I have been rubbing flame retardent jelly into my self this whole time because no doubt someone is going to yell at me Rex P.S. If you want a Turbocharged race 4AGE then forget all N/A ideas and go for the 4AGZE... [Updated on: Wed, 23 July 2003 07:59] [Report message to a moderator]

	Subject	Poster	Date
	4AGE 20v or 4AGE 16v????	wombat	Mon, 21 July 2003 03:21
	Re: 4AGE 20v or 4AGE 16v????	Nark	Mon, 21 July 2003 04:08
	Re: 4AGE 20v or 4AGE 16v????	wombat	Mon, 21 July 2003 04:10
	Re: 4AGE 20v or 4AGE 16v????	Nark	Mon, 21 July 2003 05:02
	Re: 4AGE 20v or 4AGE 16v????	arena	Mon, 21 July 2003 07:47
	Re: 4AGE 20v or 4AGE 16v????	Seadog	Wed, 23 July 2003 04:21
	Re: 4AGE 20v or 4AGE 16v????	wombat	Wed, 23 July 2003 05:40
	Re: 4AGE 20v or 4AGE 16v????	Rex_Kelway	Wed, 23 July 2003 07:57
	Re: 4AGE 20v or 4AGE 16v????	Dodgy_Haro	Thu, 08 July 2004 06:35
	Re: 4AGE 20v or 4AGE 16v????	ae86drift	Wed, 23 July 2003 12:38
	Re: 4AGE 20v or 4AGE 16v????	Johnny	Thu, 24 July 2003 05:04
	Re: 4AGE 20v or 4AGE 16v????	IRA11Y	Fri, 25 July 2003 10:32
	Re: 4AGE 20v or 4AGE 16v????	Johnny	Sun, 27 July 2003 02:44
	Re: 4AGE 20v or 4AGE 16v????	Seadog	Mon, 28 July 2003 11:53
	Re: 4AGE 20v or 4AGE 16v????	rthy	Thu, 08 July 2004 04:59
	Re: 4AGE 20v or 4AGE 16v????	rthy	Thu, 08 July 2004 04:59

Previous Topic:	manifolds on 5m's
Next Topic:	5 stud conversion for AE86 need help

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.