F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 7MGE Compression Ratio - How High ?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: 7MGE Compression Ratio - How High ?? Mon, 28 July 2003 04:27 (nitromethane's a fundamentally dumb idea - ignore above post) old corollas: its interesting to see that youre still only getting a cranking pressure of 130psi... i get this funny feeling in my bones that the 7m will be cranking 180+psi and that cant be a good thing. ive just been doing some serious reading on methanol injection, fuel preignition and relative compression ratio's etc, and it 'should' be possible to run almost 11.5:1 with adequate methanol added. i dont think ill go this far tho 10.75/10.80:1 seems about on the money, and if i can configure (crudely) a methanol/ethanol system to work properly (manifold vacumm and rpm based) then high load, hi rpm situations should be ok. i just hope fuelling wont be too hard to jerry with the stock ecu (afm and fuel pressure regulator modification) damn, anyone want to donate a m800? cheers ed [Report message to a moderator]

	Subject	Poster	Date
	7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 00:43
	Re: 7MGE Compression Ratio - How High ??	mr_mcfarlane	Mon, 28 July 2003 00:57
	Re: 7MGE Compression Ratio - How High ??	justcallmefrank	Mon, 28 July 2003 00:59
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 02:41
	Re: 7MGE Compression Ratio - How High ??	justcallmefrank	Mon, 28 July 2003 02:47
	Re: 7MGE Compression Ratio - How High ??	mr_mcfarlane	Mon, 28 July 2003 01:06
	Re: 7MGE Compression Ratio - How High ??	rob_RA40	Mon, 28 July 2003 01:13
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 03:00
	Re: 7MGE Compression Ratio - How High ??	oldcorollas	Mon, 28 July 2003 04:10
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 04:01
	Re: 7MGE Compression Ratio - How High ??	oldcorollas	Mon, 28 July 2003 04:19
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 04:27
	Re: 7MGE Compression Ratio - How High ??	oldcorollas	Mon, 28 July 2003 04:46
	Re: 7MGE Compression Ratio - How High ??	BlackSupra	Mon, 28 July 2003 06:47
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 08:20
	Re: 7MGE Compression Ratio - How High ??	ed_ma61	Mon, 28 July 2003 08:25

Previous Topic:	Aftermarket ECU with Toyota Auto?
Next Topic:	why do i keep breaking suspension bits

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.