| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1G-GTE conversion
|
Mon, 28 July 2003 13:34
 
|
 |
-You will need mounts.
-You'll need thermo fans to make it fit and you're radiator will at a minimum need to be cleaned properly.
-You'll need a new exhaust.
-You'll need an EFI fuel setup, probably best to grab tank straight from RA65.
-Probably best to change the timing belt before it goes in, but its not a necessity.
-Probably best to change the oil seals before it goes in, but again, not a necessity.
-You'll need to jimmy up some IC piping.
-You may want to replace the clutch at this stage.
-Don't forget to budget for fluids and filters, they all add up.
|
|
|
