F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1JZ-GTE , looking for a FCD Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
HedgehogSandwich Regular Location: UK Registered: May 2002	Re: 1JZ-GTE , looking for a FCD Tue, 05 August 2003 10:58 The TRL VFCC wont allow you to raise the boost cut on the 1J, just remove it - since the boost cut and the MAP limit is the same ie 1bar. If you have a map sensor that reads higher than the boost cut (eg 2JZ) then the overboost facility will work okay. The only thing you can do with a standard 1J is have the boost cut clamp the signal a tiny fraction before the 1bar limit. Having said that, Petes units from TRL are very good, they seem the best FCD's out there at present. I picked one up from him at the weekend. [Updated on: Tue, 05 August 2003 11:01] [Report message to a moderator]

	Subject	Poster	Date
	1JZ-GTE , looking for a FCD	TUB-11Y	Sun, 03 August 2003 10:13
	Re: 1JZ-GTE , looking for a FCD	Soarer	Sun, 03 August 2003 12:44
	Re: 1JZ-GTE , looking for a FCD	Chris Davey	Sun, 03 August 2003 22:42
	Re: 1JZ-GTE , looking for a FCD	TUB-11Y	Mon, 04 August 2003 00:42
	Re: 1JZ-GTE , looking for a FCD	Norbie	Mon, 04 August 2003 01:03
	Re: 1JZ-GTE , looking for a FCD	TUB-11Y	Tue, 05 August 2003 08:55
	Re: 1JZ-GTE , looking for a FCD	HedgehogSandwich	Tue, 05 August 2003 10:58
	Re: 1JZ-GTE , looking for a FCD	1JZ.747	Thu, 07 August 2003 00:48

Previous Topic:	18rg clarifications, solexes & fuel
Next Topic:	celica gt4

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.