| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: What kinda injectors?
|
Tue, 05 August 2003 15:10
 
|
 |
Jayem, also remember to consider the time available for the injector to open at high rpm.. my 1.3L will need 180-185cc/min injectors to run WOT at 8000rpm (reason is that 80% duty cycle at 8000rpm leaves 12ms for injectors to do their thing, and MS REQ Fuel is 12ms for 180-185cc/min)
you may want to check the rpm vs req fuel to see what size you need.
using the MS, low impedance is better as you can run PWM and open the injectors faster, but this is more an issue with turbo cars rather than NA.
Bosch injectors are pretty standard size, but i think Denso injectors are smaller than the bosch ones. both have a decent range of flows. google "autospeed injector flow" and that will get you a good list of injectors.
nozzle, dunno, any should be fine unless you are trying to do something tricky.
there are 4AGE injectors about the same range, and a few a little larger and smaller... both denso and bosch are commonly used and so it is a choice you gotta make as to which you can get most easily (both now and for your turbo setup later) in the right sizes....
hope this helps..
Cya, Stewart
|
|
|
