| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Re: T22 bitz in to an RA23
|
Mon, 08 July 2002 14:52
 
|
 |
Hi there....
The RA23 and TA23's are actually pretty much the same as a TA22 up untill the very front edge of the doors. The entire front end is different.
So im not totally sure about the suspension swapping over, but they are very similar. So it may work. I think the struts in the TA22 are actually slightly shorter than an *A23's. And as for the dash, the TA22's had a completely different setup.
The diff should fit in tho. I dont think there were any changes in the diff between them, apart from slightly bigger bearings in the *A23's.
|
|
|
