Author | Topic |

Club President I supported Toymods
Location: Sydney
Registered: May 2002
|
Re: 2t/3tg rebuild, power output question
|
Sat, 09 August 2003 06:21

|
 |
Juzzo,
What crank did you end up useing ? 2T or 3T ??
Snyper,
What cams are you running ?
Tina's old 2/3TG hybrid had the following specs:
EFI Removed in favour of Twin 45mm Dellortoes on Lynx sports Manifold and K&N Air Cleaners
Original Crank and Pistons Replaced with 3T crank and 1mm oversize 3T Pistons, Fully Balanced with lightened Flywheel.
L1 cosworth race cam. (I do have the specs somewhere ? )
Uprated Valve Springs and a full port and polish.
9.8:1 Compression
Extractors and 2" Sports exhaust.
It turned 76kw at the treads (or 102Hp)
With the first cam (Camtech Stage 2 401A Profile, 241 Duration at 50 with 372 Thou Lift) it turned 62.3 rwkw.
|
|
|
| Subject | Poster | Date |
 |
2t/3tg rebuild, power output question
|
juzzo84 | Thu, 07 August 2003 12:31 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Fri, 08 August 2003 03:58 |
 |
Re: 2t/3tg rebuild, power output question
|
thetoyman75 | Sat, 09 August 2003 06:21 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Sat, 09 August 2003 07:07 |
 |
Re: 2t/3tg rebuild, power output question
|
juzzo84 | Sun, 10 August 2003 18:48 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Mon, 11 August 2003 02:19 |
 |
Re: 2t/3tg rebuild, power output question
|
juzzo84 | Sun, 10 August 2003 18:50 |
 |
Re: 2t/3tg rebuild, power output question
|
juzzo84 | Tue, 12 August 2003 11:54 |
 |
Re: 2t/3tg rebuild, power output question
|
Kach22 | Wed, 20 August 2003 07:54 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Wed, 20 August 2003 09:42 |
 |
Re: 2t/3tg rebuild, power output question
|
thetoyman75 | Wed, 20 August 2003 12:23 |
 |
Re: 2t/3tg rebuild, power output question
|
Kach22 | Fri, 22 August 2003 08:04 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Thu, 21 August 2003 07:55 |
 |
Re: 2t/3tg rebuild, power output question
|
Snyper | Fri, 22 August 2003 09:27 |