F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18RGU issues Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TA22-3SGTE Regular Location: MACKAY Registered: May 2002	Re: 18RGU issues Sun, 10 August 2003 04:00 OK to get the adjustment right , unlock the lock nut and screw the locknut in towards the head a few turns this is just to get the locknut out of the way for now , then push a screwdriver through the hole in the center of the adjusting nut and hold a bit of pressure on it while you turn the motor in the normal direction with a socket on the crank nut until you feel the screwdriver move in , when the screwdriver is in at the furtherest point keep holding the pressure on it and screw the adjusting nut in by hand until you feel it hit a stop then back it off 1/2 to 3/4 of a turn then screw the locknut out and lock it against the adjusting nut without moving the adjusting nut. Trevor [Report message to a moderator]

	Subject	Poster	Date
	18RGU issues	Kergen-RA28	Sat, 09 August 2003 01:34
	Re: 18RGU issues	Kergen-RA28	Sat, 09 August 2003 02:04
	Re: 18RGU issues	omegaman	Sat, 09 August 2003 03:35
	Re: 18RGU issues	Mr DOHC	Sat, 09 August 2003 07:55
	Re: 18RGU issues	Kergen-RA28	Sun, 10 August 2003 03:31
	Re: 18RGU issues	Kergen-RA28	Sun, 10 August 2003 03:29
	Re: 18RGU issues	TA22-3SGTE	Sun, 10 August 2003 04:00
	Re: 18RGU issues	clubagreenie	Sun, 10 August 2003 06:57
	Re: 18RGU issues	clubagreenie	Sun, 10 August 2003 06:57
	Re: 18RGU issues	clubagreenie	Sun, 10 August 2003 06:57
	Re: 18RGU issues	ra23celicachick	Mon, 11 August 2003 02:41
	Re: 18RGU issues	RA28midge	Mon, 11 August 2003 03:28
	Re: 18RGU issues	Jason	Mon, 11 August 2003 03:32
	Re: 18RGU issues	RA28midge	Mon, 11 August 2003 03:40
	Re: 18RGU issues	RA28midge	Mon, 11 August 2003 06:45
	Re: 18RGU issues	Kergen-RA28	Mon, 11 August 2003 11:57
	Re: 18RGU issues	Kergen-RA28	Mon, 11 August 2003 11:50
	Re: 18RGU issues	Mr DOHC	Mon, 11 August 2003 12:00
	Re: 18RGU issues	blackRA28	Mon, 11 August 2003 13:58
	Re: 18RGU issues	ra23celicachick	Mon, 11 August 2003 22:29
	Re: 18RGU issues	Jason	Mon, 11 August 2003 22:50

Previous Topic:	rim sizes
Next Topic:	MA61 diffs

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.