F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3tgte crank angle sensor? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TA22-3SGTE Regular Location: MACKAY Registered: May 2002	Re: 3tgte crank angle sensor? Tue, 12 August 2003 11:46 Most aftermarket ECU's are made to trigger of a square wave ( hall switch ) some can be configured to trigger of either or both , If the ECU can be configured to trigger of a magnetic pickup like the toyota's use the 3TGTE dizy can be used as the main trigger but you will need another trigger setup somewhere for the home trigger which triggers before the main trigger No 1 ( to tell the ECU that the next main trigger is for No 1 cyl ) the No 1 main trigger usually is set to trigger about 60 to 100 Degrees BTDC No 1 . I am using the 3SGTE dizy which I modified a little to run direct fire on my motor using Haltech E6S . Trevor [Report message to a moderator]

	Subject	Poster	Date
	3tgte crank angle sensor?	ta22celica_boy	Fri, 08 August 2003 08:28
	Re: 3tgte crank angle sensor?	TE72_Turbo	Fri, 08 August 2003 08:58
	Re: 3tgte crank angle sensor?	ta22celica_boy	Mon, 11 August 2003 11:32
	Re: 3tgte crank angle sensor?	TE72_Turbo	Mon, 11 August 2003 12:00
	Re: 3tgte crank angle sensor?	ta22celica_boy	Tue, 12 August 2003 01:11
	Re: 3tgte crank angle sensor?	TE72_Turbo	Tue, 12 August 2003 08:35
	Re: 3tgte crank angle sensor?	TA22-3SGTE	Mon, 11 August 2003 11:43
	Re: 3tgte crank angle sensor?	YelloRolla	Tue, 12 August 2003 02:14
	Re: 3tgte crank angle sensor?	EMP-2TG	Tue, 12 August 2003 02:15
	Re: 3tgte crank angle sensor?	TA22-3SGTE	Tue, 12 August 2003 11:46
	Re: 3tgte crank angle sensor?	YelloRolla	Wed, 13 August 2003 03:09
	Re: 3tgte crank angle sensor?	TE72_Turbo	Wed, 13 August 2003 12:58

Previous Topic:	GA70 Supra 5 Speed - 4wd?
Next Topic:	How do I identify my gearbox?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.