F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 7MGE bore spacing and overbore limit Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gianttomato Forums Junkie I supported Toymods Location: I renounced punctuation Registered: May 2002	Re: 7MGE bore spacing and overbore limit Thu, 14 August 2003 00:18 Ed, I'd be pretty unkeen to machine 1.5mm off the top of the stock pistons, and agreed, I'm not interested in stroking a 2JZ either......it's a lot of dollars for only a couple hundred cc of capacity and a whole lot less 'revability'. OK. Well if you are going to do the 2JZ thing, the VVTi one is very nice. I do know the IS300 one integrates with (?) at least 6 computers! An aftermarket ECU will eliminate all of this nonsense. I know a Motec will run the VVTi solenoid, but I'm not sure whether anything else will. I picked up a VVTi 2JZGE with loom and ECU for less than $1K (no accessories). If you use a 1UZ, the Crown has a separate ECU and auto trans ECU so that may make the wiring for the auto easier. [Report message to a moderator]

	Subject	Poster	Date
	7MGE bore spacing and overbore limit	stevevp	Wed, 13 August 2003 13:18
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 13:56
	Re: 7MGE bore spacing and overbore limit	gianttomato	Wed, 13 August 2003 14:14
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 14:46
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 14:31
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 15:35
	Re: 7MGE bore spacing and overbore limit	stevevp	Wed, 13 August 2003 22:45
	Re: 7MGE bore spacing and overbore limit	gianttomato	Thu, 14 August 2003 00:18
	Re: 7MGE bore spacing and overbore limit	BlackSupra	Thu, 14 August 2003 01:30
	Re: 7MGE bore spacing and overbore limit	gianttomato	Thu, 14 August 2003 01:47
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 02:50
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 08:58
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 09:02
	Re: 7MGE bore spacing and overbore limit	BlackSupra	Thu, 14 August 2003 09:32
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 09:57
	Re: 7MGE bore spacing and overbore limit	oldcorollas	Thu, 14 August 2003 10:11
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 11:48
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 13:09
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 13:47
	Re: 7MGE bore spacing and overbore limit	Stenno	Mon, 18 August 2003 01:55
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Mon, 18 August 2003 14:17
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 11:13
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 11:17
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 22:32
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Fri, 15 August 2003 02:57
	Re: 7MGE bore spacing and overbore limit	stevevp	Fri, 15 August 2003 06:50
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Fri, 15 August 2003 08:07
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Mon, 18 August 2003 14:37
	Re: 7MGE bore spacing and overbore limit	Stenno	Tue, 19 August 2003 05:18
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Tue, 19 August 2003 11:16

Previous Topic:	NOS System difference ??
Next Topic:	N/A exhaust diameter and decreasing diameters vs flow.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.